All profiles for your users are located in their respective profile paths on a
member server in your domain. How do mandatory user profiles differ from roaming
user profiles for your users?
Mandatory user profiles will have their read-only attribute set, whereas roaming
user profiles will not.
The permission settings for mandatory user profiles only allow users to have read
access, where as the permission settings for roaming user profiles allow users to
have full access.
The suffix of a mandatory user profile is .man, whereas the suffix for a roaming
user profile is .dat
The Mandatory Profile checkbox is set on the User Environment Profile screen in
User Manager for Domains if the user has a mandatory profile. If the user has a
roaming profile, then the checkbox is clear.
Answer:3
There are 80 computers on the network. Users belong to three departments, and the
users need to access all servers in all departments. Centralized user account
administration is required. Which of the following is the best domain model for
this network?
Single domain
Master domain
Multiple master domain
Complete trust domain
Answer:1
What is the difference between a HOSTS file and an LMHOSTS file?
A HOSTS file provides mappings of remote host names to IP addresses, while an
LMHOSTS file provides mappings of IP addresses to NetBIOS names.
An LMHOSTS file provides mappings of remote host names to IP addresses, while a
HOSTS file provides mappings of IP addresses to NetBIOS names.
A HOSTS file provides mappings of remote host names to IP addresses, while an
LMHOSTS file provides mappings of remote host names to NetBIOS names.
An LMHOSTS file provides mappings of remote host names to IP addresses, while a
HOSTS file provides mappings of remote host names to NetBIOS names
Answer:1
During printing checks your printer jammed. Checks can not be reprinted as it
would violate check. The printer is turned off and the jam cleared. How can you
print your check again?
Resume from printer menu
Resume from document menu
Restart from document menu
Pause printer and restart again
Answer:3
Your company has a check printing application on an NT machine, the application
does not allow reprinting checks, the printer jam right in the middle of the
print job, how can you re-print the check after you clear the paper jam?
Choose "Resume" from the printer menu
Choose "Restart" from the printer menu
Choose "Resume" from the document menu
Choose "Restart" from the document menu
Answer:4
You have a printer and a security problem. Marie, Joe and Peter have to print the
monthly checks for the employees. For security reasons not even the administrators
are allowed to manage print jobs. Only the person who submitted the job, is able
to manage it.
Remove all perrmissions from the printer, give creator owner print permission,
make a group PrintCheck, assign Marie, Joe and Peter to the group, give
PrintCheck Manage Documents right.
Remove all perrmissions from the printer, give creator owner manage documents,
make a group PrintCheck, assign Marie,Joe and Peter to the group, give PrintCheck
Print right.
Create group, assign Maria, Joe and Peter to group, give group print right.
Create group, assign Maria, Joe and Peter to group, give group manage documents
right.
Answer:3
You are checking the disk performance of a workstation in your domain from your
PDC. You see that all disk statistics are at 0 (zero), what is the most possible
cause of this?
Workstation service does not run on the workstation
Server service does not run on the workstation
diskperf -y has not been started on the workstation
diskmanager has not been not started on the workstation
Answer:3
You have the following domain configuration:
Management <------------------- Research
User: Maria Share: Prodinfo Permissions: SalesUsers: change
MarkUsers : no access
Global group:Sales Local group: SalesUsers
Member:Maria Member:Managment\Sales
Global group:Marketing Local group: MarkUsers
Member:Maria Member:Management\Marketing
Maria has advanced in her job and has become a Sales manager. Because of her new
job she needs to change files in the Research\Prodinfo share. In which way can
this be accomplished.
Add Maria to the Local SalesUsers group
Remove Maria from the Managment\Sales group
Remove Maria from the Management\Marketings group
Make a full trust between the domains
Answer:3
You have 3 domains: ACCT, SALES and RESEARCH. You have to manage the trusts
between these domains. The requirements are the following: Users on the ACCT
domain need access to resources on the ACCT domain. Users on the ACCT domain need
access to resources on the SALES and RESEARCH domain. Users on the SALES and
RESEARCH domain need access to each others resources What is the most efficient
way to make the trust relationships:
Let ACCT trusts SALES and RESEARCH, make a full trust between SALES and RESEARCH
Let SALES and RESEARCH trust ACCT, make a full trust between SALES and RESEARCH
Let ACCT be on it’s own, make a full trust between the SALES and RESEARCH domain
Implement a full trust
Answer:2
Only payroll department could use printer only. Only users who submit the job can
control it. No one else including administrator could see and manager the printer
job.
Remove all printer existing permission. Create a Payroll group, and assign
Document Management Permissioin.
remove all printer existing permission. Create a Rayroll group, and assign Full
Control Permissioin.
Remove all printer existing permission, except Creator Special Group. Assign
Document Management Permission to Creator Special Group. Create Payroll Group who
want to print, Assign it Print Permission.
remove all printer existing permission, except Creator Special Group. Assign Print
Permission to Creator Special Group. Create Payroll Group who want to print,
Assign it Document Management Permission.
Answer: 3 (not sure, I remember that user who have print permission can manager
their document)
where you want to put a database on a RAID with MAXIMUM read/write access. Choices
were:
Use disk duplexing
Use disk mirroring
Use disk striping set
Use disk striping set with parity
Answer: 4
Your NT Server is attached to Ethernet network and LocalTalk network. There are
some Macintosh computers in both networks. The NT server install Services for
Macintosh computers. Now, you want to use the Server as a router between 2
networks. Which 2 values you must configure on the server?
zone
node type
default gateway
network numbers
internal network number
Answer:1, 2 (not sure)
You want to edit the registry using Profile Editor ?
Import the registry using Profile Editor...
Use an .ini file to import the new registry settings...
????
Use the registry to copy and paste
Answer: 1
What must you do to specify the path to user profiles on a Windows NT server?
Select all that apply.
In User Manager for Domains, open the User Properties dialog box for a user
account, and click the Profiles button to add the user profile path.
Create Profiles folder if it does not already exist, and share the folder with
someone.
Answer: 1,2
New NT. User Manager to set location of home directories for HALF of the users.
%Homepath%
%UserName%
%HomeDrive%
%UserProfile%
Answer: 2
You have implemented a mirror set to protect the boot partition. One of the two
disks in the mirror set fails. What is the best way to restore the mirror set?
Replace the failed disk with an identical disk and do nothing more. Windows NT
Server will automatically recreate the mirror set from the remaining working
partition.
Replace the failed disk with an identical disk and choose Recreate from the
Partition menu in Disk Administrator.
Replace the failed disk with an identical disk and choose Regenerate from the
Fault Tolerance menu in Disk Administrator.
Replace the failed disk with an identical disk, break the original mirror set and
create a new mirror set.
Answer:4
You have Subnet A and B. Subnet A has a DHCP Server. What should you do to let
subnet B use the same DHCP server?
Install DHCP Relay Agent
Install RIP for IP
Install WINS
Install DNS
Answer:1
You are using network monitor from the Windows NT server 4.0 standard
installation. You have just captured 400 frames from your NT server. How can you
display data originating from one specific computer to your server.
Use the address database
Use capture filter by protocol
Use capture filter by address
Use sort by address in capture window
Answer:4
Which tools are used to capture perfromance baseline.
Excel
Response Probe
Network Monitor
Performance monitor
Answer: 4
You want to create a capacity-planning baseline of internal resource for your NT
Server. Which tool you use?
Performance Monitor
Response Probe
Network Monitor
Excel
Answer:2 (check)
Tools needed for performance and baseline analysis (choose all)
Microsoft Excel
Response Probe
Performance Monitor
Network Monitor
Answer:1,3 (not sure)
Which tools are used to capture performance baseline? (choose all)
Microsoft Excel
Response Probe
Network Monitor
Performance Monitor
Answer:3,4 (not sure)
